About This Item
These are good cheap wheels. I replaced the broken wheels on a garbage can that was 3/8" shaft. I drilled out for a half in shaft (Had to patch a little crack), and installed the wheels. They move so much better than the worthless wheels it came with. They function smoothly when put on correctly. Use a little grease because these don't have bearings. That's the only reason keeping them from being 5 stars. They'd be perfect if the had some sort of bearing, however considering the price I'd say they were great. They fit the 1/2'shaft perfectly.
I'm repairing my roller magnet; I use the magnet to pick up loose nails and other metal objects that might become lodged in a tire. (Believe me, it happens...) After a few years and countless drops, one wheel broke off. These Wheels were nearly a perfect match for my broken ones. They will undoubtedly fit a lawnmower, hand trucks, and other such tools, but I needed new wheels for my roller magnet.First, make sure you need 7in tall by 1 - 1/2 in thick wheels. Next, confirm you have a 1/2 in axle; they call this the ‘Bore Size'. If you do, then you're golden. Another detail is what they call the 'Offset Hub Length'. I think of it as the axle offset. You can see that in their advertising. Just make sure you have enough 'Space'or 'offset'for clearance. In my case, as shown in my photos, I needed none, so things were OK either way.I am VERY happy with these wheels; the price is right, and they fit like a glove. As a bonus, they never go flat, they are made from rubber, but not real hard rubber.
CATEGORICAL GRADINGPresentation/Packaging: CQuality/Materials: CDesign/Craftsmanship:CPrice/Value/Worth: BFunctionality/Versatility: BInstructions/Ease - of - Use/Comfort: CMarketing vs Reality: CUtility Grade (how useful it will be to me): B(Where "C" = Average)PROS: rubber tires, 1/2" bore size, spoke reinforcement, size, offset hub, solid feelCONS: no bearings (not expected at this price though)Current price: $17.84COMMENTS: Universal plastic/rubber tires with 1/2 bore. No bearings. Purchased for new compressor that arrived with broken wheel. The offset hub helps keep it distanced from the tank, so it rolls easily when needed. Works well for intended purpose.PRECISE RATING: 4 (good at doing what I need, at least one exceptional characteristic, probably would buy again)RECOMMENDATION: If you have need for a mediam duty 7" replacement wheel, I can recommend these as they are a good value at ~ $8/ea.(As always, I will report back if there are any durability or performance issues with additional use.)PHOTO INFO (photos are loaded in order, but may be rearranged when finally posted):1) Wheels as delivered2) Wheels installed on compressorI hope you found something informative and useful in this review. Thank you for taking the time to read it. Good luck with your decision.
I changed one wheel for my pool roller. They work perfectly.
Fit our wagon perfectly!
Good buy
Just right best price
Worked for what i ordered for
I used these wheels to replace the ones on my portable generator. They are well made and roll as they should. I will see over time if they develop a flat spot from sitting in the same spot for long periods of time. So far I'm happy with this purchase.
they worked great.
Great replacement wheels for old Murray push mower.
Good fit Advertised dimensions are accurate
Needed to replace wheels on gas grill.
Fit hand truck perfectly
Heavy duty. Very sturdy. Good quality.
Wheels were b high quality but were too large for my purpose and had to be returned. Ordered and received a 6" size that also satisfactory.
Worked great on our roller magnet
Fixed a 2 wheeler to get a few more years out of it
Work just fine. Replaced my destroyed grill wheels with these.
Simple solid build. Just what we need
I bought these not to replace wheels on a dolly, but to add some wheels to our chicken tractor. They'll do just fine for that. They're tough, and a good size for what I need.
These are nice, heavy duty plastic wheels. I hoped they would work to replace a broken wheel on our radio flyer wagon, however, they are a bit smaller in diameter than the original wagon wheels.
These GICOOL - 7 - inch wheels and tires were a perfect fit onto the axle ends of a medium sized Dolly - hand truck that I found at the local trash - transfer station out in the metal recycling area. I picked these wheels because of the 1/2 - inch axle diameter openings and the size is perfect to have a level surface on the lifting plate after the wheels were installed. These wheels are very well - made and should last for many years on my Dolly with the rubber tires that are solid giving a little cushion to my loads on uneven ground, etc. I put a little MOLY grease on the axles before installing the wheels and this will last forever - basically for smooth rolling. Great find!
Great item for the price. You may need spacers or washers depending on your hand truck. I needed a few washers and new cotter pins. Overall, I'm satisfied with this purchase.
Good price for a pair of big wheels. They look good and seems to be strong. Very easy to install and fits my needs as intended.
These worked well for me - I just needed to rig up an old heavy table with two wheels so I can lift one end and move it easily. I raised the table about half an inch on one side, drilled a hole through the leg for the wheel, set it in with a long bolt and a few spacers/washers and it's perfect. The table is in a workshop so the unevenness isn't an issue.These wheels did stink - like old rubber - but I've never encountered wheels like these that didn't stink exactly like these - I work in hardware retail, they've ALWAYS stunk. The odor dissipates over timer though.