About This Item
The GICOOL 180775 Front Wheels fit my Craftsman perfectly and are working great. The installed as easily as any wheels would have and have lasted us a good while already. If I need more I would buy from here again, these are sturdy nicely made wheels.
These wheels are very solid, way heavier than I expected. I saw they were for a MTD with a 1/2 inch diameter bore so I ordered them for the rear wheels of my MTD mower. Didn't check the part numbers. However the hub offset is slightly longer than my original wheels. The design of these is that I could get them on and tighten down the nut, but when I pushed the mower the wheel turns the nut tighter and the wheels lock up. The good news is the hub is solid plastic so I was able to cut the an extra 1/8 inch off the hub and now they work great. They worked even though not right part number.
They fit my Craftsman with the 22" blade.Went on quickly. Take a moment to check the small drive gear for organic debris buildup.These wheels don't have the sintered type bearing insert in the wheel which spins on the shaft( like the original wheels did).My hope is that the plastic alone will be a lubricant against the steel shaft and not prematurely wear out. Certainly the plastic teeth on the original wheels didn't hold up.I did spray and wipe the shafts with wd40 to clean them for a fresh start.Performance seems good on the test drive.
Great tire to use on your lawn mower if you need an upgrade. I did not use them for my lawn mower, I upgraded my cooler tires and they worked great. Easy to set up and the traction on the tires works well.
Yes my Craftsman lawn mower is over 20 years old but it's still runs like a champ.These wheels fit perfectly as a replacement and have the same gear teeth and size as the original equipment that's been on the machine for over 20 years.
These replacement wheels are well built, sturdy and almost an exact match to my original wheels. The only reason I knocked a star off is because the inside diameter is 1/4" longer than the originals. Once bolted on and tight the wheels wouldnt spin because it was longer than the spacer. This was an easy fix and I just got a longer spacer from HD, but the write up said it fit MTD but maybe not all.
Got these to replace my old craftsman 21 inch mulcher rear wheel drive lawn mower wheels, basically a five star rating, 1.6 offset work perfect with my lawn mower, only down side, original wheels were 8.5 inches not 8. But couldn't find any other configuration offered. Lawn mower works well now.
Did not fit the mower. Returned.
Tires are a perfect match. The wheels engage properly when the front wheels drive is activated. Very happy with product so far.
Fit perfectly on Husqvarna 22in walk behind
Fits perfectly in my craftsman lawnmower
Perfect fit easy to install.
Very nicely made and has a rubber tread to give it better traction. I used this in a way that was not intended. I recently had new shingles put on my roof and bought a rolling magnet to find any loose nails in the yard. My grass is very lush and thick, the wheels that came with the magnet were not tall enough. The grass was scraping the nails off of the magnet, so I ordered these larger wheels to increase the height of the magnet. This worked great and saved my zero turn mower from having lots of flats - I probably found a couple hundred nails (filled a small peanut butter jar).
These are VERY sturdy. I had a hard time unscrewing the old wheels, so I wasn't able to put these on my wagon, but I'd be happy with this product if I was able to get the other wheel off! Made of real rubber and a hard plastic.
These front wheels are an ideal replacement for worn - out or damaged wheels on lawn mowers. Made from durable, high - quality materials, they offer smooth maneuverability across different terrains, making mowing effortless. The solid construction resists cracking and wear from grass, dirt, and debris. The 2 - pack provides a cost - effective way to keep your mower moving smoothly.Installation is quick and easy, requiring just a wrench. The wheel threads work well with most lawns. The universal fit ensures compatibility with a wide range of lawn mower models. It's a great value for anyone needing a long - lasting, hassle - free replacement wheel set for a lawn mower.
This was a perfect replacement for my worn out 8 inch wheels on my Troy - Bilt TB 110 mower. These have a more rubberized tire than the OEM version did. These new wheels are solid. Even though the TB 110 is not listed as compatible, and that these are front wheels, they are indeed a great replacement for the rear wheels of the TB 110 mower. The inner hub teeth are clearly for self propelled, possibly front wheel drive, mowers, but these spin freely as rear non - geared replacements.