About This Item
I bought these on sale in April 2025 for $50 for my SCAG Freedom Z. Although they included an extra set of smaller 5/8" bearings the Freedom Z needs 1/2" center hole bearings, so I needed smaller Id bearings.After searching I found XiKe sells a 1/2"x 1 3/8" x 1/2" flange bearings set of 4 for $10. I knocked out the 3/4" flange bearings and tapped in the 1/2" set. With the plastic spacers they included I was able to center the two wheels in each yoke with minimal effort.The ZiKe bearings have black rubber seals on both sides so trying to grease them with the zero fitting won't work unless you remove the rubber seals. Since they are already lubricated I left them as is.So far so good. I cut 3 lawns today with no problem. We will see how long these flat free tires and bearings last. $60 is a lot cheaper than $200. For that it gets 5 stars. These might last a year or two. I recommend getting new 1/2" x 7" bolts at the hardware store.
Extremely harsh ride. Develops flat spots if allowed to sit for several days in hot climate.
They work great! No more having to put air in my tires. A little bit of a rougher ride, but thats fine.
they fit well and looked good, however I have not mowed with them yet. Had to drill my axle bolt holes to 5/8 to get them to work. I knew I had 1/2 bolts when I ordered but chose to drill and replace mine because I was having a hard time finding no flats that fit my 1/2''shaft bolts. Also these were priced good . I did have to use about 3/4 of the spacers they provided with the wheels
The fit good
It worked ok
I grabbed this 2-pack of GICOOL flat-free tires for a zero-turn, and they've been great so far. The solid PU design means no air, no leaks, and no dealing with low-pressure wobble. The smooth tread rolls clean and handles turns without any weird slipping.The adjustable hub setup is actually really handy -- being able to set it anywhere from 3.25" to 5.9" makes it easy to match different mower setups. The kit includes both 3/4" and 5/8" bearings, so getting the right fit is pretty much plug-and-play.Once installed, the wheels spin smooth and track straight. They feel sturdy, and the mower definitely handles better than it did with the old worn-out pneumatic tires.
Great product! Fit perfectly with no problems
So I'm happy with these wheels. They fit my tractor as is but come with bushings if you have narrower axles. The yellow color is so interesting and looks pretty cool. The wheels I'm replacing have tread and are not smooth like these but I don't think it's going to matter because the front wheels are not drive wheels. I was pretty tired of finding my tires to be low on air or just plain flat so this will be an improvement in that sense anyway because they can't go flat. They were pretty easy to change out. 4 stars because I can't actually mow my grass yet but in a few weeks I'll be ready to roll !!From everything I can see , they seem to be a good value. I will update my review after I'm able to mow.
Looks just like the factory tires !!! Easy to install !!
They fit. You might need to make adjustments. But no issues over here.
There were just enough spacers to make it work on my 52" walk behind.Been thru 3 sets of inflatables. 2 acres of cutting, still look brand new.
Put a set of these on my swisher pull behind mower. I use it to mow woodland trails they work great and no more flats. I did need to put a longer axel rod in the back as the hubs are wider than my old ones were but it was a easy fix that cost around 12 dollars from my local still sales place
Great product used on jd z645 works great
Very nice wheel and tire easy to put together
This flat free tires are awesome! Easy to install on my Hustler Raptor SD 48" deck
Perfect fit, easy install for my Cub Cadet 50 zero turn
As the title says thease will get the job done. This kit is for DIYers, I ended up having to swap bearings and adding 8 spacers (included) to make them fit my JD z535m zero turn. Overall looks to be cheap product and time will tell if the hold up. The bearings need packed with Grease as there was little in there. Will update when something fails.
Comes with everything in the pitcher. After installing the front wheels I spun wheels to test the bearings and they roll good. They are worth the price and easy to install.
Great product, fits Great would buy again thanks
I have a 54" Cub Cadet zero turn and I use it to mow our front field which has a lot of big green briars. I was having to replace/repair tubes a couple times a season. These solved that problem, well worth the investment.
Tires were a great fit and never have to worry bout a flat
If you park your mower on cement you could possibly end up with flat spots on these.
If you leave the lawnmower sitting in one spot the have flat spots.
No more flats
Awesome fit no more flats
Ease of replacement
When it sits for a while tires get flat spots, takes a while to round out when you use it.