11x4.00-4" Tiller Tire and Wheel, 3/4" Axle Size, 3-1/8" Centered Hub, Compatible with Craftsman & Troy-Bilt Tiller Replacement (2 pack)
11x4.00-4" Tiller Tire and Wheel, 3/4" Axle Size, 3-1/8" Centered Hub, Compatible with Craftsman & Troy-Bilt Tiller Replacement (2 pack)
KEY PARAMETERS
Type - Tube Type Pneumatic
Model - 11x4.00-4
Tire Diameter - 11 inches
Tire Width - 4 inches
Tire Material - 4PR
Tire Tread - Super Lug/AG
Tread Depth -
Borehole - 3/4 inch
Hub Length - 3-1/8 inch
Hub Type - Centered N/A
Rim Diameter - 4 inches
Load Bearing - 300 lbs
Pack Quantity - 2
Best for - Tiller
Couldn't load pickup availability
Share

About This Item
- PROMPTS: You are purchasing a replacement tire set for an 11x4.00-4" size tiller, this set contains one left wheel and one right wheel, please check the size data of your old tire before purchasing.
- TIRE PARAMETERS: Tire Model: 11x4.00-4"; Tire Diameter: 11-inch; Tire Width: 4-inch; Centered Hub Length: 3-1/8"(80mm); Bearing Bore: 3/4".
- PIN HOLES PARAMETERS: The hub has pin holes on one side, Pin Holes Diameter:0.275" (7mm), Pin Hole-to-Hub Edge Diameter:0.39" (10mm).
- FEATURE: Heavy duty 4-ply tire, sharp-angled tread elements for maximum pulling and pushing power, the tire often found on garden tractors, tillers, and trenchers.
- TIPS: When mounting the tire, please follow the direction guide on the tire to mount the tire correctly.
- 5 stars: 52 (90%)
- 4 stars: 3 (5%)
- 3 stars: 2 (3%)
- 2 stars: 1 (2%)
- 1 star: 0 (0%)
Good buy
Good price, decent quality. Only $4 more than replacing the tube
Solved my problem at a great price that was well below the local shops. Easy to install and functions beyond my expectations. Very happy with purchase.
Great! Two come in the box‼️
They're the same as what came with the tiller
Fast service got what I need -
The tires and wheels are heavier duty and need a smaller pin because the wheel is thicker
For the cost, well worth it. ALERT!!!!ATTENTION!!! Add air first! Sounds like a no - brainer but when you receive these they're very solid and feel like they are already filled up.I found out the hard way they are not. Rim spun inside the tire and tore up the tube. DOH!!!
Bought this for our tiller, fits great! Would buy again
The tires arrived on time and "appeared" to be just exactly what was ordered and needed, however, after they were mounted and used for less than an hour it was obvious something was wrong with the inner tubing. In checking it appeared that both tubes had a large fail at the valve stem. It was a if the tube was defective in both tires as each had a large crack right were the valve stem attaches to the tube. Very very frustrating. So with less than an hours use my husband had to go spend another 40.00 dollars for new tubes as time was an issueand made returning them impossible.
Excellent value much better than I could have hoped for, But -- -- I had to source new Clevis Pins my old pins were to long . A conventional bolt and nut was subed untill a new clevis was ordered.
Good company they back there product.
Just what i need
Very well made. Sturdy
Never have to worry about loosing air in them over the winter now
All good
Great replacement tires for my tiller.
Great quality, quick to ship.
Easy to change, work great.
Perfect fit for my Troy Built rear tine tiller. After living with a slow air leak for way too long, these got me back to work tilling instead of filling up tires. They are a very similar style to the OEM tires. No complaints.
These are much better than the ones that came on our new Troy - Bilt tiller.
Direct fit. Quality item.
Item as described
Excellent tires and wheels came with a tube which is better
Exactly what I needed! Accurate description helped with my purchase!
Perfect replacement for my Troy - bilt Bronco CRT tiller
Looks good fast shipping
The product arrived quickly and in excellent condition. There was a couple of things that make installing the new wheels on my Troy built bronco more difficult than it had to be. First, the paint inside the hole for the shaft doesn't let the wheel slide onto the shaft. I had to drive it on part - way and then pull it back off several times and then buff the shaft with fine sandpaper to remove the paint that was stuck on the shaft. Once the paint was cleaned out of the hole the wheel slid on easily. Second, these rims are smaller than the originals. The pins that keep the wheel from spinning on the shaft will have to be replaced. It would save the customer a lot of hassle if the correct pins were included with the wheels.
Couldn't find replacement tires for my troy bolt tiller anywhere except here. Great quality.