About This Item
I bought the 10 inch version of these solid rubber tires to replace the 10 inch pneumatic rubber tires I have on my heavy duty Hand Dolly. In the past few years I've only used my hand dolly a couple times per year, but every time I need it the tires were always flat. These tires will solve that problem for good.I did measure my existing tires and axel size with a tape measure before ordering these. Please do the same if you need a set as well to insure they will fit your axel size and hand cart / dolly correctly. My existing pneumatic tire size was 4.10 / 3.50 – 4 and these new solid rubber tires said they were a direct replacement for that tire size. See my photos for some direct measurements I took on these new ones as well.As you can see in the photos I took during installation these new solid rubber tires are quite a bit narrower width wise. They are also not quite as tall as my existing pneumatic tires. So an exact direct replacement they are not, but they did fit quite nicely regardless.The wheel hub sizing width was also a perfect fit and there was no side - to - side slop to be had after installation on the axels. There was just enough room to install the flat washer and pin the cotter key back in place on each wheel. The axel bearings are also well made and spin freely.My only concern is with the width of these new solid rubber tires. The actual width of the tread on these solid rubber tires is only 1 - 5/8" wide. See photo of my tread measurement. Being quite narrow they may tend to dig in when being used on gravel driveways and grass lawns while carrying a heavy load or a home appliance such as a refrigerator. If the tires tend to dig in which I suspect, they will under those circumstances this will make it harder to keep your forward momentum moving under a heavy load. For that reason I need to knock a start off my review. I will get my much wider width pneumatic tires ready for when I encounter gravel and lawn terrain.For hard surface use these tires will do just fine such as inside a home, on concrete sidewalks, asphalt or concrete driveways, etc.
Good price.
Excellent QUALITY.
Right fit.
Heavy duty.
EZ installation.
These are truly heavy duty tires.
Best Bang for buck in wheels these size. Super happy with them!Very durable - use them on gravel a alot and holding up great.
They fit, they're strong, they can't go flat, and they're easy to mount.
These seem to be fairly well made wheels. I think the bearings in them could be of better quality, but overall they served the purpose I needed them for.
Excellent wheels!!!
These are heavy duty solid wheels. Very satisfied two thumbs up
Used these to replace a set of dolly wheels that had inner tubes and would constantly be getting flats and bad tire rot - these seem much more sturdy and reliable in comparison to those.
Been putting these baby's to work hauling just about anything and MUAAHHH . A beauty, I jerry rigged it on to some refurbished dollys and boy do I no longer carry heavy stuff.
Me parece un excelente producto y fácil de instalar
No more flats
My innertube tires ended up going out on me when I was moving my gun safe with my dolly and I ordered these to replace those tires. Came in fast, went on quick and simply, and worked without issue. Great tire option.
Worked perfectly.
Have 2 garden hose dolly's and I was going to replace the tube AGAIN. Found these for a bit more than the tube price and had them on in ~ 5 min each.No more flats. Just the right size. Very sturdy.Happy
Had a dolly with pneumatic wheels, every time I wanted to use it one of the wheels was flat. Buying new inner tubes for those got too expensive and a hassle, so I switched them out for these solid rubber wheels. There is of course less cushioning with these and they also seem heavier, but the dolly works just fine. I just used it to move a range and a washer and it worked well both indoors and outside on the way to the garage. They did smell strongly of rubber or some chemical for the first few days, but then the smell dissipated. Quite happy with the purchase.
excellent upgrade.
I will never have another flat on my hose reel
Like the perfect fit
This pair of solid core rubber dolly wheels arrived to me without any damages, and other than them coming somewhat dirty inside the box on initial inspection I have had no complaints with them so far. They only took minutes for me to install, and they fit on the axles of my old dolly well without being either too tight or too loose.Although the rims are made of plastic, they still seem to be petty thick, and were able to haul a heavy washing machine up and down some stairs without giving any signs of stress. Metal rims corrode very quickly in the high humidity where I live anyways, so hopefully the plastic will actually be an advantage for me in the long run.As long as these solid core rubber dolly wheels continue to serve me as well as they have up to now they will keep my initial 5 star rating, but if they eventually come up with any serious problems I will update this review with any important details, and lower my rating if needed as well.GICOOL 10" x 2.5" Flat - Free Solid Rubber Tire and Wheel 5/8" Axle Bore Hole, 2 1/4" Offset Hub, Replacement 4.10/3.50 - 4" for Hand Truck Dolly Trolley Garden Wagon Cart Generator, 2 Pack
Great product highly recommend
These wheels are really nice, a very well - made product, and they fit my Generac PowerBOSS 8000 generator perfectly using the original 5/8" axle. I would recommend these to anyone looking for a well - made set of wheels at a very reasonable price.
My old wheels on my hand - truck had cracked and come apart; I wanted to get the hand - truck working again. These were the same size as the original tires on the truck, so I ordered them. Just like the old ones, they used a plastic center and hard plastic/rubber solid tires along with a 5/8" axle. It was easy enough to remove the old cotter pins and tires and replace with these. I did need to user new cotter pins, as mine were rusty and broke during removal. It works like it did originally, the tires performed well under the loads I recently moved (about 300 pounds) so I suspect they will last a long time also.
Very sturdy wheels. Way better than the wheels my dolly had on it.
This review is for a pair of the 10" plastic hub no - flatsOne advantage to pneumatic tires is they are typically wider and so will not sink in to sand or mud as quickly. What they are is always flat. Still, don't go skinnier if they are just going to sink for youI ordered these for a hose reel cart even though they were total over kill. Each tire weighs 5.42Lbs! (2.46Kg) Maybe I should have just filled the old tires with spray foam insulation to see how long that would last.Harbor Freight's solid tires are about $10 each but are only rated 220Lbs. These are rated for 500Lbs, 600Lbs max according to the listing. The box nor the tires themselves say anything. No brand. No manufacturer. No weight limit. No size.Nothing. At. All. See photosThese stink like recycled rubber, but unfortunately all the others probably do tooThe hub is about 2mm wider than the standard hose cart wheels so the nuts re in a few less threads. I don't expect that to be a problemI'm taking off two stars, mostly for not printing at least the weight limit on the tires, and also for the odor