Product Description
Perfect match for OEM product and the blade was pristine for mowing. Blade uses a 15mm wrench to loosen the nut that holds it on and is super easy replace the blade as the grooves only allow for one way to install aka perfect fit. I am not certain this steel is as hard as oem, as I got a bit more flex when pressure was applied. That being said, It shouldn't be an issue for grass, but that means more frequent sharpening.Overall I am pleased, and think you will be too. Side by side picture for reference.
After a very abusive season of use for our 80v Greenworks mower dealing with rocks, small limbs and shrub cuttings our original blade was clearly in no condition to be sharpened... but we didn't want to pay the price of the original vendor's replacement so we gave this one a try. It's a perfect fit for our mower, measuring right at 21" length. The fittings are correct with the "V" notches for sure fit/alignment/direction when bolting to the deck. The quality of teh blade is great ... perhaps even a bit heavier steel than the original. The shape/contour matches the original... something we discovered is important after a less quality blade was used and caused crazy vibrating of the mower when in use... likely due to being out of balance, I'm told.
Our 80v Greenworks mower came with a spare blade but we're tough on the mower as its'used for mulching tree/bush trimmings so the blades aren't really suited for sharpening after the season. GW replacements aren't inexpensive so this one was a worthy trial given that it's about 50% less and shipping was free. It's heavy/sturdy... perhaps even more so than the original. Fit is perfect... 21" exactly and notched side holes as appropriate (and safe) for fit on the mower. Blade configuration matches the mulching style and angles for the original as well. The only real difference we found with this one compared to original is that it isn't green... but the original didn't stay green after more than a couple uses anyway.
Finally a way to replace the standard blade on my greenworks 21" 80v mower. Before this I could not find the standard non - high lift blade for my mower. I only use this blade twice a season because I usually mulch the grass directly back in, but those two times I need this blade I need it to be very sharp. I have been using the blade that came with the mower but I have to stop twice and sharpen the blade for my size yard. I looked on the company website and could not find a replacement blade other than the high lift; so glad to finally have another option.I like that this blade came wrapped in plastic because I can buy a couple of these and not need to worry they will rust if I just keep them around. They are fully painted, but the plastic wrap adds some nice insurance against rust. This blade is the same size shape and approximately the same weight as the OEM blade ( my OEM blade is used so that could be the difference)InfoPerfect fit 80v 21" greenworksWrapped for long term storageSounds the same when runningNice and sharp all the way to the end
Fit exactly right. Not laser sharp! I am going to sharpen it prior to using it, it is not very sharp. Good quality steel. Doesn't have any flex or bend. It didn't have any vibration or wobble when I tried the mower. No grass to mow being winter.... I checked the thickness with a micrometer and it matched the original blade. Honestly the only difference I found is the lack of being sharp. Decent value for a good quality blade if you don't mind taking the time to sharpen it.
In the original listing it says, "2 PACK" - there is only 1 blade. The blade is good quality and perfectly balanced. Edges are sharp and cut well. Works with Greenworks mower. Good price for ONE blade.
Perfect replacement for Greenworks mower.
Works perfectly on my Kobalt 80 volt mower.
Fits just like the oem blade but for a lot less. Cut well, grass was smooth and even.
My Greenworks mower now works as it should have from the factory. The mower now has some suction and throws grass all the way into the catcher.
fit my 80 volt green works pro...Quality seems good .
Excellent replacement blade that provided a sensational first cut for my lawn! With the free shipping it cost lower than purchasing from the manufacturer!
So far it's been doing the job
I've been sharpening and reusing my original blade for my 80v Kobalt push mower (first model, I think) for about 12 years. It's been great but it was time replace it.This blade was a drop in replacement with no issues at all. The tip is slightly different shape but the curvature towards the ends is the same and it lifts and chops as well as the original. I've run it over about an acre of mowing in the course of maybe an hour and it's held up just fine.Happy to have a new sharp, balanced blade on here to start the summer.
The metal and design are equal to the original part. Exact fit.The blade was easy to swap out. Upon testing the new blade, it felt balanced and left a good clean cut behind the mower.I tested the blade with my blade balancer, it was spot on.This replacement blade is a good value and I am very pleased with it.After 3 weeks and 6 mowings the blade still looks good and is still cutting great.
This blade fit my Greenworks 21" lawn mower perfectly and the replacement was very easy. Within minutes I had it installed and my mower was ready to go again for the summer season. The price is very affordable compared to buying a new blade from the store.Performance is great. It cuts both tall and short grass very smoothly and leaves the lawn looking clean and even. The quality feels solid and it works just like the original blade.If you need a simple, budget-friendly replacement blade for your Greenworks mower, this is a great choice. Easy install, good price, and excellent cutting performance.
Since it is still winter I have not had a chance to use them yet. However, I purchased the Greenworks brand and these seem to be every bit as good and maybe even better.The only issue I have is not with the product but with the description when I ordered them. It said there were 2 blades in there but I only received one. The description now says there is only 1 blade. Since this was a promotional item I was not too concerned.
I recently replaced the blade on my EGO 21 - inch mower with the GICOOL 21" replacement. Installation was straightforward, and the arrow marking made it easy to align the blade correctly. It fit my mower deck without any modifications, and there was no noticeable vibration when running.The blade seems sturdy and well balanced. I used it for bagging leaves and cutting grass, and it performed as expected. It arrived pre - sharpened and wrapped in plastic, which helps protect it from rust while in storage.One thing to note is that the steel feels slightly more flexible than the original OEM blade, so it may need sharpening sooner if used heavily. Overall it works as a replacement and matches the size and weight of the original blade.
I have not switched out this blade yet, but it looks to be a perfect match, very sturdy, sharp and exactly what I was looking for as my mower is a few years old. I have no idea how easy it will be to assemble, but I will find out.If I have anything new to update once I switch it out in the spring, I will update my review🍃 🌿 🍃 🌿 🍃 🌿 🍃 🌿 🍃Vine: The Unfiltered TruthI'm a Vine reviewer. Translation: I get products, pay taxes on them (hello 1099), and give zero BS reviews in return. If I give a product 5 stars, it actually earned them. If it gets roasted, it deserves that too. I'm not here to make friends with manufacturers—I'm here to save you from buyer's remorse.
REVIEW: 1 - Pack 21" Lawn Mower Blade, Compatible with Greenworks 21" Mower: Blade is as expected. Fits my 80V Greenworks 21" mower perfectly. Website description and pictures are correct. It's winter so can't say how well it works but expect it to work like the original. It was easy to put on looks sharp but that is easy to sharpen if needed. I'll try not to hit any rocks or tree roots to dull it. Price is inline with others I've bought.
This mower bladed are great quality and fits nicely to my 21 inch mower.This are quite solidly made and pretty sharp.This are well priced for 2 pack and will last quite long.It is made from high quality steel and packed well.
The GICOOL 21" Lawn Mower Blade replacement blade is made of high quality steel providing for an easy clean cut. The blade is extremely sharp, along with being nicely balanced, making sure to not damage your lawn, keeping it looking fresh and healthy all season long. Due to the sharpness of the blade, it is shipped with end protectors, making sure not only does nothing get damaged in shipping, but also ensuring no accidents while opening it. The GICOOL 21" Lawn Mower Blade is a great value compared to what you'd get at a big box store.
I found this blade to fit my Greenworks 21 - inch mower perfectly. It works well when I'm doing yard work on my weekends. The installation was straightforward, and I'm pleased with how it cuts. ?? It's helpful having a reliable blade that makes mowing easier and quicker. Happy with the purchase overall.